drooping, holes, clawing ,and burn HELP!
by BC420LED » Sun Mar 02, 2014 11:50 pm
First time posting for help andI could really use it! day 3 after transplant. leafs have continued to droop and url down into a claw. some burning on edges has appeared and some small holes have also burned through fan leaves. ph is 5.9 and stays between 5.7 and 6.2 there are 8 BC Big Bud clones that are well rooted into rockwool and transplanted into hydroton in net cups DWC style 2 days ago. water level is one centimeter below net cups. ppm was at 450 but i know that is too high so I lowered it to 360. Should I go lower for fresh clones? 400 watt led is 31in above net cups and on 20 on 4 off light schedule. using heavy 16 nutrients full line besides foliar spray. Any help is much appreciated and thank you in advance for any contributions.
- Attachments
-
- IMG_4751 22-15-52-588.JPG (153.04 KiB) Viewed 11286 times
-
- IMG_4749 22-15-52-586.JPG (107.92 KiB) Viewed 11286 times
-
- IMG_4748.JPG (168.85 KiB) Viewed 11286 times
-
- IMG_4747.JPG (242.79 KiB) Viewed 11286 times
-
- IMG_4746.JPG (108.57 KiB) Viewed 11286 times
-
- IMG_4745.JPG (182.97 KiB) Viewed 11286 times
- BC420LED
- Posts: 26
- Joined: Wed Nov 20, 2013 2:09 pm
Re: drooping, holes, clawing ,and burn HELP!
by SisterMaryElephant » Mon Mar 03, 2014 1:25 pm
You want the pH under 6.0, I aim for 5.8 so that could be part of it. If the roots aren't coming out of the bottom of the net pots you can either raise the water level a bit or top feed a few times per day until they do. Once the roots are in the nutrients they can probably take more food. Make sure that your buckets aren't getting too warm either...
Disclaimer:
I still use HID and I'm NOT an LED expert. All of my LED knowledge is from other parties or research so I can't say from first hand experience one way or another. I also run a medical grow consulting business in SoCal.
I still use HID and I'm NOT an LED expert. All of my LED knowledge is from other parties or research so I can't say from first hand experience one way or another. I also run a medical grow consulting business in SoCal.
- SisterMaryElephant
- Posts: 2633
- Joined: Thu Sep 22, 2011 10:05 pm
Re: drooping, holes, clawing ,and burn HELP!
by BC420LED » Mon Mar 03, 2014 2:15 pm
SisterMaryElephant wrote:You want the pH under 6.0, I aim for 5.8 so that could be part of it. If the roots aren't coming out of the bottom of the net pots you can either raise the water level a bit or top feed a few times per day until they do. Once the roots are in the nutrients they can probably take more food. Make sure that your buckets aren't getting too warm either...
Thank you SME I will keep ph below 6 and raise water level. Also looking into a water chiller.
- BC420LED
- Posts: 26
- Joined: Wed Nov 20, 2013 2:09 pm
Re: drooping, holes, clawing ,and burn HELP!
by BC420LED » Thu Mar 06, 2014 2:53 pm
HELP PLEASE!
DAY 6
Still looking worse. Flushed everything and replaced water. ppm 235, 5/8 roots
DAY 7 HELP!!!
HELP, Now for the first time fan leaves developed black spotting all over them very quickly, nute burning got much worse, and most of the leaves have curled down. 7/8 roots out. I need help whats going on here? any advice for fixing? I have pictures of day 7 below.
DAY 6
Still looking worse. Flushed everything and replaced water. ppm 235, 5/8 roots
DAY 7 HELP!!!
HELP, Now for the first time fan leaves developed black spotting all over them very quickly, nute burning got much worse, and most of the leaves have curled down. 7/8 roots out. I need help whats going on here? any advice for fixing? I have pictures of day 7 below.
- Attachments
-
- IMG_4790.JPG (154 KiB) Viewed 11266 times
-
- IMG_4798.JPG (148.27 KiB) Viewed 11266 times
-
- IMG_4799.JPG (162.6 KiB) Viewed 11266 times
-
- IMG_4796.JPG (146.34 KiB) Viewed 11266 times
-
- IMG_4795.JPG (85.09 KiB) Viewed 11266 times
-
- IMG_4794.JPG (158.46 KiB) Viewed 11266 times
-
- IMG_4792.JPG (138.7 KiB) Viewed 11266 times
-
- IMG_4791.JPG (165.75 KiB) Viewed 11266 times
- BC420LED
- Posts: 26
- Joined: Wed Nov 20, 2013 2:09 pm
Re: drooping, holes, clawing ,and burn HELP!
by BC420LED » Thu Mar 06, 2014 3:43 pm
SisterMaryElephant wrote:You want the pH under 6.0, I aim for 5.8 so that could be part of it. If the roots aren't coming out of the bottom of the net pots you can either raise the water level a bit or top feed a few times per day until they do. Once the roots are in the nutrients they can probably take more food. Make sure that your buckets aren't getting too warm either...
I kept the ph at 5.8 and finally got 7/8 of them too root out but the burning continued and after replacing water they got really bad. Please help!
- BC420LED
- Posts: 26
- Joined: Wed Nov 20, 2013 2:09 pm
Re: drooping, holes, clawing ,and burn HELP!
by SisterMaryElephant » Sun Mar 09, 2014 11:59 am
I'm back; how are they now?
Disclaimer:
I still use HID and I'm NOT an LED expert. All of my LED knowledge is from other parties or research so I can't say from first hand experience one way or another. I also run a medical grow consulting business in SoCal.
I still use HID and I'm NOT an LED expert. All of my LED knowledge is from other parties or research so I can't say from first hand experience one way or another. I also run a medical grow consulting business in SoCal.
- SisterMaryElephant
- Posts: 2633
- Joined: Thu Sep 22, 2011 10:05 pm
6 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 0 guests